PowerElecHub

About Power Electronics Hub

What this site is

Power Electronics Hub collects the calculations that come up again and again in power electronics design work. It focuses on automotive applications (EV chargers, battery precharge) and on industrial power supplies and motor drives. The site is run by an engineer who has designed power converters from 1 kW up to 100 kW for automotive and industrial applications.

Every calculation runs in your browser. Nothing you type is sent to a server, and you do not need an account.

What you will find here

The site has three parts. The calculators size components and check designs, from converter power stages and control loops to precharge resistors, snubbers, heatsinks and capacitor life. The guides explain the reasoning behind a calculator in more depth, with a worked example and the mistakes to avoid. The visual explainers animate ideas that are easier to see than to read, such as the Clarke and Park transforms, PWM and ADC timing, space vector PWM and control block diagrams.

Where the formulas come from

Formulas follow the standard equations from textbooks and manufacturer application notes, and worked examples are recalculated before they are published. Each calculator page explains the method, lists the formulas it uses and gives a worked example.

Where a page follows a particular application note, paper or book, it names the source so you can check it yourself.

Calculators are checked against the cited application notes or papers where the source is available, worked examples are recomputed with the published code, and corrections are dated.

Accuracy

Results are engineering estimates, and the limits of each method are described on its page; they do not replace datasheets, simulation and testing. If you find an error, tell us through the Contact page. We check it, fix it and note the update date.